| | | | | | | |  | Ultra Sonic Toy Attaching Eye MachineMetal Detector | | | | | | | | | | | Description Check that electrical power source is rated 220V,50/60Hz Turn upward square electric leckage breaker(E.L.B)located at left center Only meter No.1 of the 4 meters, viz No.3, and No.4 is raised to GEREEN color Press red button at side and meter No.3 is raised to GREEN. At this time, meters No.2 and No.4 should remain at ZERO POINT. Press foot switch Meter No.4 is raised to GREEN to indicate normal operation. At this time, front part of hom is smooth and operation will be smoothly carried out. Always have meter No.4 indicate GREEN by turning PHASE handle with foot S/W pressed, when HORN is replaced. if not successful, repeat procedure detailed in paragraph 9. Air pressure entering cylinder is to be 2 to 3 kg/cm2 If meter No.4 indicates RED color, overload switch will trip, or fuse will bum out du to excessive current load. If not successful; First replace HORN, or read just with PHASE handle. Specification WPS-900N 220 50/60 900 100 630*650*1070 WPS-400 220 50/60 400 25 440*200*250 WPS-10 9V Battery 250g 1.0~2.0 165*60*36 WPS-150 220 50/60 35 100 1.5~2.0 770*400*650 50*40*20 WPS-2000 220 50/60 65 130 1.5~2.0 Conveyor belt speed 40/20m per minute 2000*750*850Description This machine is automatic, and does not need adjustment. The machine is designed to trip when metal weight is over or below 1/1 millionth by means of the balance principle. Machine is viulnerable to shock. Machine does not operate when vibration is occuring in it's vicinity Machine can be monitored by placing a hand inside. Radio waves are not absorbed when such waves are generated by electrical appliances or electric welding machine. Set sebsitivity level for use in control box to 50% to 80%. Readjustment is not required after first adjustment is completed. Place detector in a dry place, as it is vulnerable to direct light and hunidity. |
| | [ Contact Info ] |  Company | FRC Korea Co., Ltd.Description This machine is automatic, and does not need adjustment. The machine is designed to trip when metal weight is over or below 1/1 millionth by means of the balance principle. Machine is viulnerable to shock. Machine does not operate when vibration is occuring in it's vicinity Machine can be monitored by placing a hand inside. Radio waves are not absorbed when such waves are generated by electrical appliances or electric welding machine. Set sebsitivity level for use in control box to 50% to 80%. Readjustment is not required after first adjustment is completed. Place detector in a dry place, as it is vulnerable to direct light and hunidity. | | Address | 645-16, Banghwa-dong, Gangseo-gu, Seoul 157-220 Korea | | Phone | 82 - 2 - 26663031 | | Fax | 82 - 2 - 26663032 | | Homepage | www.frckorea.com | | Contact | |
| | | | | | | |
| | | | |